HomeAbout UsSpecialsRidgid ToolsObrien JettersStoneAge NozzlesContact Us


Allan J. Coleman
5725 N Ravenswood Ave.
Chicago, IL 60660


Phone:
773-728-2400
Fax: 773-728-2499

 

   

Home>Ridgid>Drain Maintenance


Drain Maintenance
K-3800 Drum Machine
Model K-3800
   
For 3/4" to 4" (19-100mm) Drain Lines

Features
A powerful, easy to transport, versatile machine for cleaning indoor drains. Requires minimal set-up to clean sink lines, floor drains and roof vents.
Rugged, corrosion-resistant molded cable drum wont dent or rust. The drum tilt adjusts for proper cable feed angle. Inner-drum guards against cable flip-over.
Cable drums quick-release and built-in hand-holds allow easy cable change and transport.
Standard drum capacity is 100' of 3/8" or 90' of 1/2" (30m/10mm or 27m/12mm) continuous length cable:
3/8" cable best for 1 1/2" to 3" lines up to 100'.
1/2" cable best for 2" to 4" lines up to 90'.
Optional sink drum holds up to 50' of 5/16" or 1/4" (15m/8mm) cable.
Ideal for cleaning through 3/4" to 1 1/2" sink traps.
Powerful 1/12 HP Universal Motor spins cable at 240 RPM. When cable hits blockage, motor gears down automatically to deliver more power and enhance operator control.
Tools connect to cable in seconds.
CSA approved.
Approved to UL standards (NRTLC).
IW (Integral Wound) cables available. IW cables are slightly stiffer and kink resistant. All IW cables use 3/8" T-200 series cutters.

 
Model K-3800


Machine Options
Cat. No. Model No. Description Weight
115V 220-240V lb. kg
53107 59462 K-3800 K-3800 Machine w/Gloves 42 19.0
53112 - K-3800 w/C-31 K-3800 Machine w/Std. Equip.
C-31, 3/8" x 50' Cable
T-202 Bulb Auger
T-205 C Cutter
T-211 Spade Cutter
A-13 Pin Key
Pair of Gloves
65 29.5
53117 63827 K-3800 w/C-32 K-3800 Machine w/Std. Equip
C-32, 3/8" x 75' Cable
T-202 Bulb Auger
T-205 C Cutter
T-211 Spade Cutter
A-13 Pin Key
Pair of Gloves
71 32.2
53122 63822 K-3800 w/C-45 K-3800 Machine w/Std. Equip.
C-45, 1/2" x 75' Cable
T-102 Funnel Auger
T-142 Knife Blade Cutter
T-107 Spade Cutter
A-12 Pin Key
Pair of Gloves
83 37.7
53127 - K-3800 w/C-46 K-3800 Machine w/Std. Equip.
C-46, 1/2" x 90' Cable
T-102 Funnel Auger
T-142 Knife Blade Cutter
T-107 Spade Cutter
A-12 Pin Key
Pair of Gloves
91 41.3


Inner Core (IC) Cables
Good flexibility and more cleaning power to the cable end

    Cat. No. Model No. Description Weight
lb. kg
3/8"
10mm
  37842 C-31 50' (15m) IC Cable 18 8.2
37847 C-32 75' (23m) IC Cable 26 11.8
37852 C-33 100' (30m) IC Cable 34 15.4
51752 T-122 Repair End 1 0.5
1/2"
12mm
  37857 C-44 50' (15m) IC Cable 27 12.2
37862 C-45 75' (23m) IC Cable 39 17.7
37867 C-45HC 75' (23m) Hollow Core Cable 38 17.2
55467 C-46 90' (28m) IC Cable 47 21.2
59917 T-121 Repair End 3/4 0.8


Integral Wound (IW) Cables
Wound tighter on the inner core creating a solid assembly

    Cat. No. Model No. Description Weight
lb. kg
3/8"
10mm
  87577 C-31IW 50' (15m) IW Cable 18 8.2
87582 C-32IW 75' (23m) IWCable 26 11.8
87587 C-33IW 100' (30m) IW Cable 34 15.4
1/2"
12mm
  91037 - Repair End for IW Cable 0.5 0.2
87592 C-44IW 50' (15m) IW Cable 27 12.2
87597 C-45IW 75' (23m) IW Cable 39 17.7
91042 - Repair End for 1/2" IW Cable 0.6 0.3


Sink Drum Cables
    Cat. No. Model No. Description Weight
lb. kg
1/4"
6mm

Funnel
50652 S-2 25' (7.6m) w/Fun nel Auger 3 1/2 1.6
50657 S-3 35' (10.7m) w/Funnel Auger 5 2.2
5/16"
8mm

Bulb Auger
56782 C-1IC 25' (7.6m) Inner Core w/Bulb Auger 4 1.8
56792 C-13IC 35' (10.7m) with Bulb Auger 5 1/2 2.5

Drop Head
56787 C-2IC 25' (7.6m) Inner Core w/Drop Head Auger 4 1.8
56797 C-23IC 35' (10.7m) with Drop Head Auger 5 1/2 2.5


Tools Fit 3/8" IC, 3/8" IW and 1/2" IW Cables C-31,C-32,C-33,C-31IW,C-32IW,C-33IW,C-44IW and C-45IW
  Cat. No. Model No. Description Replacement Blade(s)


62990 T-201 Straight Auger, 5" Long -
62995 T-202 Bulb Auger, 11/8" O.D. -
63000 T-203 Bulb Auger, 7/8" O.D. -
  63065 T-217 Drop Head, 4" Long -
  54837 T-204 C Cutter, 1" 54832
63005 T-205 C Cutter 1 3/8" 97835
  63010 T-206 Funnel Auger, 3" Long -
  63015 T-207 Spiral Cutter, 1 1/4" 97840
63020 T-208 Spiral Cutter, 1 1/2" 97895
63025 T-209 Spiral Cutter, 2" 97900
  63030 T-210 Grease Cutter, 1" 97905
63035 T-211 Grease Cutter, 1 3/8" 97825
63040 T-212 Grease Cutter, 1 3/4" 92850
  63045 T-213 4-Blade Cutter, 1" 97795
63050 T-214 4-Blade Cutter, 1 3/8" 97910
63055 T-215 4-Blade Cutter, 1 3/4" 97915
  63060 T-216 Chain Knocker, 2" 98000
  49002 T-260 Tool Set (3/8")
T-202 Bulb Auger
T-205 C Cutter
T-211 Spade Cutter
A-13 Pin Key
-
  12128 T-240 Tool Set (3/8")
T-202 Bulb Auger
T-211 Spade Cutter
A-13 Pin Key
-


Tools Fit 1/2" IC Cables
C-44, C-45 and C-46

  Cat. No. Model No. Description Replacement Blade(s)


62850 T-101 Straight Auger -
62855 T-102 Funnel Auger 97800
  62865 T-104 H Cutter, 2 1/2" -
  62870 T-105 Grease Cutter, 2 1/2" 97920
62875 T-106 Grease Cutter, 3 1/2" 97925
  62880 T-107 Spade Cutter, 1 3/4" 92850
  62930 T-112 4-Blade Cutter, 13/4" 97915
62935 T-113 4-Blade Cutter, 3" 97940
  62940 T-114 Chain Knocker 97985
  54842 T-141 Knife Blade Cutter, 1 1/2" 54847
54852 T-142 Knife Blade Cutter, 2 1/2" 97800
  54992 T-270 Tool Set: T-102 Funnel Auger, T-142 Knife Blade Cutter, T-107 Spade Cutter, A-12 Pin Key -
  92687   Drop Head Tool Adaptor 1/2" -


Accessories
  Cat. No. Model No. Description Weight
lb. kg
  55002 A-380 Standard Drum for 3/8", 1/2" Cable 12 1/2 5.6
55007 A-381 Sink Drum for 5/16", 1/4" Cable 12 1/2 5.6
55012 A-381-A Sink Drum with 25' x 5/16" IC Cable w/Bulb Head 16 1/2 7.5
  41937 - Pair Of Gloves 1/2 0.2
  59230 A-13 Pin Key For 3/8" Cable 1/2 0.2
59225 A-12 Pin Key For 1/2" Cable 1/2 0.2
  55017 - Transport Cart 18 8.2
  60087 A3800 PF. Power Feed 7 3/8 3.3
  62412   Front Guide Hose Adaptor Kit 3 1/2 1.6
  59982   Cable Rust Inhibitor 1 QT. 2 1/2 12
59987   Cable Rust Inhibitor 1 GAL. 8 1/2 6

 


Call 773-728-2400 today for pricing and orders!

 

 


Ridgid Location and Inspection ToolsObrien JettersRidgid Threading Tools
StoneAge Sewer and Drain Cleaning NozzlesElectric EelRidgid Drain Cleaing Machines

---- Oldest name in the business! ----




2007 ® Allan J. Coleman - All Rights Reserved